Fly Ash Pump

Approx. Rs 15,000 / PieceGet Latest Price

Product BrochureProduct Details:

Features:
• Excellent quick automatic priming action without foot valve up to 8 mtrs.
• Automatic air release during priming.
• Back pull design, so easy maintained without disturbing pipe lines.
• Dynamically balanced rotating parts ensure less vibrations.
• Better efficiency because of good hydraulic design.
• Non-clog impellers to handle solid particles up to 16 mm.
• Minimum parts, fast repairing at low cost, Also pump is available at
• Available in Bare, Coupled, Monobloc, Belt driven & Engine driven
• Also offered pump with trolley / trailer to move it from one place to
• Graded casting & perfect machining of all components ensure long life.
• ABLE TO OFFER PUMPS WITH CLOSED IMPELLERS FOR CLEAR LIQUIDS.
• Monobloc pumps can be able to with stand with wide voltage fluctuations.
• Less expensive & easily available spares.
• Pumps can be fitted with mechanical seal as per customer's requirements.
Application:
• Public utilities: For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bilge, for desk wash & engine cooling.
• Industrial : Petroleum product, Ceramic product Chemicals, Thermal plants etc.
• Tiles & Marble factories, effluent plants.
• Marine Works: Handling liquids from docs, ports and vessels etc.
• Salvage Operations : Fire fighting.
• Mobile Machinery : Cooing water for marine engines and shovels.
• Any application where priming is to be avoided.

Approx. Rs 70,000 / PieceGet Latest Price

Product BrochureProduct Details:

Vertical Centrifugal process pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp , corrosiveness etc
These pump are designed for use where the liquid handled to be is of highly corrosive
Nature or where non – adherence of product or zero metallic contamination is must
These pumps are equally ideal for continuous or intermittent service for handling
Corrosive as well as ultra pure chemicals without fear of corrosion or contamination
High Temperature services : Maximum working temperature is 110 C / 200 C.
Length : Pumps lengths available from 1’ to 12’ with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made .
Models : Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available.
Special Features :
• Bearing free design for handling abrasives in solutions.
• Motors are flange mounted single or three phase TEFC from 1 HP to 100 HP .
• Epoxy / Polyurethane paints are used on metallic bearing housing.
• Radial vanes on backside of impeller increase flow or fluids through the sleeve
bearing preventing overflow at top of column.
• Lubrication of bearings by product itself or by fresh water.
• All models operate at 1450 rpm / 2900 rpm (Variable speed motor available )
• Specially designed vapor seal provided to protect bearing from corrosive fumes
• Dynamically balanced impeller

Approx. Rs 2,52,000 / PieceGet Latest Price

Product BrochureProduct Details:

TECHNICAL SPECIFICATIONS: -Pump Type: -VERTICAL SUMP PUMPPump Make: -TOSS.Pump Model: -VSP- 3No Of Stages: -Single Stage.Delivery sizes: -100 MM.Require Discharge capacity: - 60 M3/HRDischarge Head: - 18 meter.Shut Of Head: - 25 meter.Type of Impeller: -Semi Open Impeller.Pump length : - 1800 MMSealing:- Seal less
MATERIAL OF CONSTRUCTION: -Pipe of mild steel, shaft C-45,Casing M.SImpeller and Wear Plate of High Chrome.(Impeller High Chrome 24 to 28 %)
MOTOR SPECIFICATIONS: -“25 HP X 1440 RPM”, 415 Volt, 3 Phase, 50 Hz, “CROMPTON” MakeIE-2, IP-55 Protection, AC Supply, Horizontal Foot Mounted, NON-Flame Proof Motor.
SCOPE OF SUPPLY: - Only Pump and motor.
PRICE (Without GST): -Total Price:-252000  Rs /-Each. Pump price:-180000Motor price:-72000
DELIVERY PERIOD : 6 weeks

Approx. Rs 15,000 / PieceGet Latest Price

Product BrochureProduct Details:

Features:
• Excellent quick automatic priming action without foot valve up to 8 mtrs.
• Automatic air release during priming.
• Back pull design, so easy maintained without disturbing pipe lines.
• Dynamically balanced rotating parts ensure less vibrations.
• Better efficiency because of good hydraulic design.
• Non-clog impellers to handle solid particles up to 16 mm.
• Minimum parts, fast repairing at low cost, Also pump is available at
• Available in Bare, Coupled, Monobloc, Belt driven & Engine driven
• Also offered pump with trolley / trailer to move it from one place to
• Graded casting & perfect machining of all components ensure long life.
• ABLE TO OFFER PUMPS WITH CLOSED IMPELLERS FOR CLEAR LIQUIDS.
• Monobloc pumps can be able to with stand with wide voltage fluctuations.
• Less expensive & easily available spares.
• Pumps can be fitted with mechanical seal as per customer's requirements.
Application:
• Public utilities: For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bilge, for desk wash & engine cooling.
• Industrial : Petroleum product, Ceramic product Chemicals, Thermal plants etc.
• Tiles & Marble factories, effluent plants.
• Marine Works: Handling liquids from docs, ports and vessels etc.
• Salvage Operations : Fire fighting.
• Mobile Machinery : Cooing water for marine engines and shovels.
• Any application where priming is to be avoided.